Graphite Shaft Driver Irons Woods - Golf Equipment: Find, Compare, Read ::
Iron Shafts: State-of-the-art materials and cutting-edge technology combine to create this af need in a set to help your game. The HiPPO Giant
http://shopping.yahoo.com/t-Golf-Equipment/graphite-shaft-driver-irons-woodsHOME |
bought a taylormade burner and t s 46 inches long, and i want to cut it down to 45 or 44 inches. is it possible to cut the shaft of the driver. if so, where can i go to cut the shaft?
Do it yourself, just put tape around where you will make the cut with a saw
If you are going to go that short with your shaft....you might as well use your 3 wd off the tee. The purpose of a longer shaft is distance. Oh.....Any Pro can shorten it if that is what you really want to do. Snainton Golf Direct - BEN SAYERS M2 TITANIUM DRIVER::
actually does help with huge distance - the Aldila shaft is something special too. The 2 sculpted cut outs in the rear of the sole pull weight out from the
http://www.snaintongolf.co.uk/product.php/1531/ben_sayers_m2_titanium_driverHOME |
4DX Driver Wins at the Nationwide Tours Rex Hospital Open::
Anytime you can help someones game so much and get players excited about the Nickent Strikes First With 4DX Evolver and Interchangeable Shaft Technology
http://www.nickentgolf.com/to_pr-070611.shtmlHOME |
Why do you want to shorten it.?..Have you been to a Pro to have it fitted,?,Remember Taylormade is manufactured by a Company whose business is GOLF.......
A very fine hacksaw blade will do the job ( once you have carefully removed the grip, that is.) Saw very slowly, especially when you are almost thru. Then regrip and you are done. You can do this yourself, for the cost of a grip and solvent. Driver | Golf Equipment::
Driver features cutting edge Dual Nanoscale Technology in the head and shaft works to increase clubhead speed to help golfers of all levels drive the ball
http://www.worldgolf.com/equipment/golf-equipment/driver?page=2HOME |
club maker shop can do it .and most people cannot handle of 46 driver
43.50--to 44 .is the best if you hit the sweet spot more often it will go farther ,than new big clubs you are easier to hit than the old ones because the ball one further on missed hits that's the difference if you control the club and hit the center you be further down the fairway . Car Racing Tech Articles - Car Engine Upgrades, Performance Tuning ::
A used stock car buyers guide with tips to help you make the right decision more be a good stress reliever as NASCAR drivers and crews go behind the wheel of
http://www.stockcarracing.com/tech/index.htmlHOME |
cutting down the shaft of any golf club ruins the club in general. the shaft was designed for a certain reason, and changing the dimension of the golf club ruins its purpose... dont buy clubs that are too long 4 u!
You can. Go to your local Pro Shop, or Golf Store, and they will usually do it for you.
You can cut it on both ends of the shaft but I would recommend cutting the grip end...It willl not affect the flex much ..if you cut the head end of the shaft it affects the flex and swing weight quite a bit..just wrap some grip tape around where you want to cut, make your measurment and use a hack saw to cut...
 I Am a Sinner – What About You?
 Global Sourcing and Supplier Online by Dylan
|
Cut the shaft of driver help?